Anchor Glass mixer machine blends material for 38 years

  

A Rotary Glass Batcher brought on line in 1980 at Anchor Glass Conatiner Corp still mixes the ingredients that produce more than a million glass containers per day. 

It is estimated that over the past 38 years it has helped produce 14 trillion containers and 3.6 million tonnes of material.

The 1.4m3 capacity GB-50 Rotary Glass Batcher supports the flint glass line that produces bottles and jars made of clear sodium silicate glass at Anchor’s Elmira, New York facility.

Anchor Glass is headquartered in Tampa, Florida and operates production facilities in New York, Florida, Georgia, Indiana, Minnesota and Oklahoma, as well as a mould manufacturing plant in Ohio. It manufactures glass bottles and jars for the food and beverage industry. 

"Glass containers have been manufactured at the Elmira, New York location since 1912 when Thatcher Glass Manufacturing operated the factory," says Michael Gesek, Engineering Services Manager, who has been with the company for 24 years.  "The location has two furnaces, one for amber glass and one for flint glass –– the industry term for clear glass," he explains.         

The Rotary Glass Batcher (pictured) was manufactured by Munson Machinery Company and installed on a new glass production line, and was rebuilt in 2011.

It consists of a horizontal vessel that rotates on external trunnion rings at both ends, eliminating internal shafts or bearings that would be unable to withstand constant contact with highly abrasive materials. 

Internal vanes, or 'flights', create a four-way tumble-turn-cut-fold mixing action as the drum rotates. 

"The action of the internal mixing flights is critical for mixing efficiency and blending of ingredients rapidly and thoroughly,” Mr. Gesek says.

Ingredients are loaded through a stationary inlet at one end of the machine, and discharged through a stationary outlet at the opposite end. When the discharge plug gate valve is opened, the flights also serve to lift the material toward and through the discharge port. 

The drum rotates until discharge is complete, preventing separation or stratification of ingredients having disparate sizes, shapes and bulk densities. 

“One hundred percent discharge means no carryover from one batch to the next," Mr. Gesek says, "and we've been very happy with that."

The mixer keeps rotating while the ingredients are loaded and discharged, which Mr. Gesek says is an advantage. 

“We like that it doesn’t stop between batches. We run five or six batches – 45 minutes to an hour – then shut off for half an hour, depending on production requirements. If we had to stop the mixer between batches, much more power would be required.”


Most Read | 7 Days

Most Read | 14 Days

Most Read | 30 days